Creality
Ender-3 V3
CoreXY Precision. Ender-3 Price.
The Ender-3 V3 brings a full CoreXY motion system and Klipper firmware to the iconic Ender-3 chassis — delivering 600mm/s K1-class performance at a fraction of the K1's price.
Everything You Need. Nothing You Don't.
The key features that make the Ender-3 V3 stand out in its class.
CoreXY Motion at 600mm/s
Unlike the V3 SE and V3 KE which use traditional bed-slinger Cartesian motion, the Ender-3 V3 adopts a proper CoreXY belt architecture. This keeps both the print head and the bed mass low, enabling genuine 600mm/s movement with far less ringing than a bed-slinger at equivalent speeds.
Klipper with Input Shaping
Factory Klipper with resonance compensation enabled means the V3 prints at high speeds without the ghosting artifacts that plagued earlier Ender-3 generations. Pressure advance keeps corners sharp and extrusion consistent at all speed settings.
CR Touch Auto Bed Leveling
Automatic 25-point CR Touch mesh compensation runs before every print for consistent first layers across the full 220×220mm surface — no manual adjustment, no feeler gauge routines.
300°C Direct Drive Hotend
A direct drive extruder paired with a 300°C hotend covers PLA, PETG, ABS, ASA, and TPU. The short filament path improves retraction performance and makes flexible filaments reliable at the speeds the CoreXY system enables.
Dual Z-Axis Stability
Twin Z leadscrews prevent the gantry tilt that causes vertical banding on single-Z machines. Combined with Klipper's Z tilt adjust macro, the V3 maintains a perfectly square build envelope from bottom to top.
Wi-Fi & Creality Cloud
Native Wi-Fi connectivity with Creality Cloud integration enables remote print monitoring and control from your phone. The local Klipper web API also supports Fluidd and Mainsail for advanced remote management.
Full Sensor Suite
Filament runout detection and power-loss recovery come standard — essential for the longer print sessions the V3's speed enables by expanding the range of printable projects within a given time budget.
K1-Class Performance, Ender-3 Budget
The Ender-3 V3 offers the closest experience to the K1 SE at a substantially lower price — CoreXY, Klipper, 600mm/s. The primary tradeoffs are the open frame (no enclosure) and smaller build volume compared to the K1 SE. For open-frame printing of PLA, PETG, and TPU, it is the standout value in the entire Creality lineup.
Ender-3 V3 — By The Numbers
Creality Ender-3 V3
Click below to see the latest deal on the official Creality store
- Creality Ender-3 V3 3D Printer (partially assembled)
- Power cable
- USB cable
- 1× 200g PLA sample spool
- Spare nozzle (0.4mm brass)
- Toolset (hex keys, scraper, nippers)
- CR Touch probe (pre-installed)
- Quick-start guide
Ready to print smarter?
The Ender-3 V3 is in stock now. Get the best price direct from Creality.
Common Questions
Both use CoreXY and Klipper at similar speeds, but the K1 SE is fully enclosed (better for ABS/ASA) and has a slightly larger build volume (220×220×270mm vs 250mm). The Ender-3 V3 is open frame, which limits it to PLA, PETG, and TPU without additional enclosure, but it prints the same quality for those materials at a meaningfully lower price.